Patients with Lateral and Anterolateral Cam Morphology Have Greater Deformities Versus Typical Anterolateral Deformity Alone, but No Differences in Postoperative Outcomes: A Propensity-Matched Analysis at Minimum 5-Year Follow-Up.

PURPOSE: To compare pre- and post-operative findings between patients undergoing hip arthroscopy for femoroacetabular impingement syndrome (FAIS) with lateral impingement versus those without lateral impingement METHODS: Patients who underwent primary hip arthroscopy for FAIS between 2012-2017 with minimum 5-year follow-up were included. Alpha angle (AA) was measured on preoperative AP and 90° Dunn radiographs. Patients with AA > 60° on Dunn view but not AP view (no lateral impingement) were propensity matched by sex, age, and BMI in a 1:3 ratio to patients with AA > 60° on both views (lateral impingement). Demographic characteristics, radiographic and intraoperative findings, reoperation rates, and patient-reported outcomes (PROs) were compared between groups. Categorical variables were compared us Fisher's exact testing and continuous variable using two-tailed student's t tests. RESULTS: Sixty patients with lateral impingement (65.0% female, age: 35.3 ± 13.0 years) were matched to 180 patients without lateral impingement (65.0% female, age: 34.7 ± 12.5 years, p ≥ 0.279). Lateral impingement patients had larger preoperative AAs on both Dunn (71.0° ± 8.8° vs. 67.6° ± 6.1°, p = 0.001) and AP radiographs (79.0° ± 12.1° vs. 48.2° ± 6.5°, p < 0.001). However, there were no differences in postoperative AAs on either view (Dunn: 39.0° ± 6.1° vs. 40.5° ± 5.3°, AP: 45.8° ± 9.0° vs. 44.9° ± 7.0°, p ≥ 0.074). Labral tears began more superiorly in patients with lateral impingement (12:00 ± 0:49 vs. 12:17 ± 0:41, p = 0.030), and theydemonstrated higher rates of acetabular and femoral cartilage damage (p = 0.030 for both); however, there were no differences in PROs or reoperation rates between the groups at 5-year follow-up. CONCLUSIONS: Although cam deformities located laterally and anterolaterally are larger than those located anterolaterally alone, both can be resected adequately, resulting in similar postoperative radiographic measurements, PROs, and survivorship.

Young Bovine Hip Model for Hip Arthroscopy Training.

Hip arthroscopy is associated with risks for complications, especially for novice surgeons. The present article reports use of a young bovine hip as a valid educational tool for key components of arthroscopic treatment of femoroacetabular impingement syndrome, ie, labrum repair and cam excision. The purpose of this Technical Note is to describe the steps of arthroscopic femoroacetabular impingement treatment in the bovine hip.

The effect of arthroscopic coracoplasty on subscapularis strength in cases of subcoracoid impingement in the absence of subscapularis tear.

Subcoracoid impingement leads to anterior shoulder pain, and arthroscopic subcoracoid decompression (coracoplasty) is the preferred treatment in recalcitrant cases. The purpose of the present study was to evaluate the effect of coracoplasty on the severity of anterior shoulder pain and the strength of the subscapularis muscle and to correlate it with the preoperative and postoperative coracohumeral distance (CHD) (t:transverse, s:sagittal). Sixteen patients without any subscapularis tendon tears who underwent arthroscopic subcoracoid decompression and rotator cuff repair with 2 years follow-up were included. Preoperative and postoperative 2-year assessments of function and pain were performed using the modified Kennedy-Hawkins test, power grading of various subscapularis muscle tests, and ASES scores. Preoperative and postoperative coracohumeral distance (tCHD, sCHD) and coracoid overlap (CO) were measured using MRIs before and after surgery. The Mean Hawkins pain score and coracoid overlap were decreased. The strength scores for subscapularis strength testing, ASES score, maximum degree of internal rotation, and coracohumeral distance increased (P < .05). Changes in belly press strength were negatively correlated with postoperative tCHD (r = -0.6, P = .04) and postoperative sCHD (r = -0.7, P = .008). A significant increase in the internal rotation range of the shoulder, subscapularis strength, and relief of anterior shoulder pain was observed. However, this increase was inversely proportional to the postoperative CHD, indicating the mechanical effect of the coracoid on subscapularis strength.

Making the cut: a technical note and literature review of Bernese periacetabular osteotomy techniques with special attention to ischial osteotomy initiation and completion with an inside to anterior curved osteotomy.

Periacetabular osteotomy includes a fluoroscopy-guided ischial cut without direct visualization. Previously described techniques include a mediolateral ischial cortex cut, which is associated with the risk of injuring nearby nerves. Another drawback of that technique is the difficulty connecting an ischial cortex cut with a retroacetabular cut due to orthogonal nature of the osteotomy. In general, an additional cut from medial to lateral is required. The present study aimed to describe a technique that eliminates those problems due to use of only a central cut of the ischium and the curved nature of the osteotomy.

Postoperative alpha angle seems to be important for the achievement of clinical significance at a minimum 5-year follow-up after primary hip arthroscopy.

The purpose of the present study was to clarify whether there is an association of postoperative alpha value with functional scores or progression of osteoarthritis at X-rays at the midterm after arthroscopic treatment of femoroacetabular impingement (FAI) syndrome with femoral osteoplasty, labral repair or debridement and rim trimming. A retrospective review of prospectively gathered data from 2013 to 2017 was performed. All patients who underwent first-time unilateral hip arthroscopy for FAI resection with 5-year follow-up were included. Patient-reported outcomes included the modified Harris Hip Score (mHHS) and Visual Analog Scale for Pain (Pain VAS). The progression of osteoarthritis (Tönnis grade) and radiological parameters (alpha angle, lateral center-edge angle [LCEA] and head-neck offset) were evaluated. A receiver operating characteristic (ROC) analysis was used to evaluate the correlation between significant variables and achievement of patient-acceptable symptomatic state (PASS) and degree of osteoarthritis. We identified 52 patients with a minimum 5-year follow-up (average, 6.7 years). The average patient age was 33.9 ± 11.5 years. There were 19 (36.5%) female patients. The mHHS improved from 60.1 ± 13.4 before surgery to 86.8 ± 14 after surgery (P < 0.001). The Pain VAS decreased from 6.21 before surgery to 2 after surgery (P < 0.001). Overall, 69% achieved the PASS for mHHS. The ROC curve for postoperative alpha angle demonstrated acceptable discrimination between patients achieving a fifth-year PASS value and those who did not have an area under the curve of 0.72. Patients having a postoperative alpha angle of ≤48.3° achieved the fifth-year PASS value at a significantly higher rate than patients having a postoperative alpha angle of >48.3° (P = 0.002). The postoperative alpha angle is a predictor of the achievement of the fifth-year PASS value for the mHHS. A threshold of ≤48.3° had a sensitivity of 0.75 and a specificity of 0.69 to predict positivity. Level of evidence IV.

All-Endoscopic Modified Krackow Suture for Proximal Hamstring Repair.

Surgical repair of proximal hamstring injuries can relieve pain and restore lower extremity function in active individuals. Whereas traditional surgical techniques are performed via an open approach, more recent endoscopic proximal hamstring repair techniques have proven safe, effective, and potentially associated with fewer complications than open repair. One theorized disadvantage of existing endoscopic techniques is reduced security at the suture-tendon interface, as compared to open surgery, during which a running suture technique, such as a Krackow stitch, may be employed. In this article, we present a technique for increasing suture purchase by performing an all-endoscopic, running, locking stitch during proximal hamstring repair.

Effect of cam resection depth on clinical outcomes after primary hip arthroscopy.

BACKGROUND: The amount of resection or the starting point of the resection on the femoral head for cam lesions in femoroacetabular impingement (FAI) is controversial. AIM: The purpose of this study was to study the effect of postoperative resection depth, and resection arc ratio of cam lesion on the frequency of achieving substantial clinical benefit (SCB), patient acceptable state (PASS) in modified Harris Hip Score (mHHS) and Hip Outcome Score Activity of Daily Living (HOSADL), 2 years postoperatively. PATIENTS AND METHODS: All patients who underwent first-time hip arthroscopy for FAI with a 2-year follow-up were included in this study. Patient-reported outcomes included the mHHS, HOSADL, and visual analogue scale for pain (Pain VAS). Radiological parameters such as alpha angletraditional (αT), alpha anglecartilage (αC), resection arc ratio (% alpha anglecartilage-alpha angletraditional/360°), resection depth (''D''mm) and resection depth ratio 'D%' (D/femoral head diameter %) were measured using the 45° Dunn view. RESULTS: We identified 26 patients (27 hips) with 2-year follow-up. There were 10 female and 16 male patients. The mean age of the patients was 33 ± 12 years.Higher frequency of achieving SCB threshold for mHHS was related to labrum repair (73% vs. debridement '27%' p = 0.03), lower preoperative αT (64° vs. 76°, p = 0.04), lower preoperative mHHS (54 vs. 81, p < 0.001) and higher preoperative VAS scores (8 vs. 7, p = 0.02). Higher frequency of reaching PASS threshold for mHHS was associated with lower αC (82°vs. 92° p:0.02), lower RA (8% vs. 11%, p = 0.03), lower D (2.8 mm vs. 4.5 mm p:0.03), lower D% (4.7% vs. 8.4% p = 0.04) and higher postoperative mHHS (97 vs. 82 p < 0.001). CONCLUSIONS: A higher frequency of achieving SCB for HOSADL was related to lower D% (5% vs. 10.5%, p = 0.04).Cam resection depth affects the frequency of achieving clinically meaningful scores and resection depth less than 6% of the femoral head diameter seems to be appropriate for optimal results. The starting point of resection on head cartilage needs to be <90° when alpha angle is used for reference.

Histomorphological Investigation of Microfracture Location in a Rabbit Osteochondral Defect Model.

BACKGROUND: Microfracture is the most common treatment for cartilage defects of the knee. In microfracture surgery, holes are randomly drilled into the subchondral bone. The effect of the hole's location on its interaction with the cartilage defect site and its influence on the healing process is currently uncertain. PURPOSE: To investigate the effects of different microfracture locations on healing in a rabbit knee osteochondral defect model. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 29 adult New Zealand White rabbits were divided into 5 groups. In the healthy cartilage control group (n = 5), no surgical procedure was performed. Cylindrical full-thickness cartilage defects (5 × 3 mm) were created in the patellar groove of the remaining 24 rabbits. In the defect control group (n = 6), only the defect was created. A microfracture was performed at the 12-o'clock position (group peripheral single; n = 6), centrally (group central; n = 6), and at the 12- and 6-o'clock positions (group peripheral double; n = 6) of the defect. The animals were sacrificed after 8 weeks. Cartilage healing was evaluated by International Cartilage Regeneration & Joint Preservation Society (ICRS) score, modified O'Driscoll score, immunohistochemical analysis (type 1 collagen, type 2 collagen, and aggrecan), and scanning electron microscopy analysis. RESULTS: In group peripheral double, better cartilage healing was observed in all parameters compared with the other groups (P < .05). Group peripheral double had the greatest amount of filling, with 79% of the defect area filled with fibrocartilage repair tissue. Group peripheral single demonstrated filling of 73% of the defect area, group central 56%, and the defect control group 45%. The ICRS score was significantly higher in group peripheral single compared with group central and the defect control group. Type 2 collagen and aggrecan immunoreactivity were significantly stronger in group central than group peripheral single and the defect control group (P < .05). CONCLUSION: Microfracture performed at the peripheral margin of the defect had better filling characteristics in a rabbit model. This study suggests that interaction of pluripotent cells released from the microfracture site with the intact cartilage may enhance the quality of the repair tissue. CLINICAL RELEVANCE: The location of microfracture holes in relation to the peripheral border of the osteochondral defect (to the intact cartilage) is important in both the quality and the quantity of the newly formed repair tissue.

Can modified Dunn radiographs be an alternative to standing AP pelvis radiographs in the evaluation of pincer femoroacetabular impingement?

The purpose of this study was to compare modified Dunn radiographs with standing anteroposterior (AP) pelvis radiographs in respect of the tilt ratio, lateral centre-edge angle (LCEA), crossover sign, crossover percentage and joint space width measurements. The study hypothesis was that modified Dunn radiographs could be an alternative method to standing AP pelvis images in the evaluation of pincer-type femoroacetabular impingement (FAI). The study included 31 patients with a mean age of 42 years (range: 29-55 years) who had modified Dunn and standing AP pelvis radiographs taken in the radiological evaluation of non-traumatic hip pain between July 2018 and September 2022. Similar tilt ratio values were obtained on standing AP and modified Dunn images (P = 0.986). Joint space width showed a decrease in the transition from the modified Dunn position to the standing position, but the difference was not statistically significant (P = 0.161). The mean LCEA was measured as 34° ± 4° in the standing position and as 35° ± 5° in the modified Dunn position. No statistically significant difference was determined in the number of patients with a crossover sign or the crossover percentage values in these patients (P > 0.05). The data obtained in this study showed that there was no significant difference between images taken in the standing and modified Dunn positions in respect of radiological findings of pelvic tilt and pincer-type FAI. The modified Dunn radiograph is equivalent to the standing AP pelvis radiograph for the evaluation of pincer FAI.

Revision of a Failed Primary Total Hip Arthroplasty following Excessive Reaming with a Medial Cup Protrusion.

Background and Objectives: Atraumatic intrapelvic protrusion of the acetabular component following excessive reaming of the acetabulum with a far medial positioning of the cup is a rare, but serious complication of a total hip arthroplasty (THA). This study analyzes the factors contributing to this uncommon complication and presents the outcome after the revision surgery using the Ganz reinforcement ring combined with a bone graft and plating of the posterior column and/or screws for the anterior column. Materials and Methods: A retrospective case series study with seven patients (four males, mean age 76 ± 10 years (60−86)) that underwent a revision THA within 24 ± 17 days (5−60) after an atraumatic periprosthetic acetabular fracture with a medial cup protrusion was performed. All fractures were reconstructed with a Ganz reinforcement ring and bone graft with a mean follow-up of 1.7 ± 1.7 years (0.5−5). Radiographs were evaluated for the following: (i) cup positioning immediately after the primary THA and the revision surgery, (ii) cup migration in the follow-up, and (iii) fracture healing. Results: The position of the acetabular component as assessed on the postoperative radiographs after the index surgery and before the complete medial cup protrusion showed a cup placement beyond the ilioischial line indicative of a fracture of the medial wall. The revision surgery with the reconstruction of the medial wall with a Ganz reinforcement ring combined with a bone graft restored in the presented cases the center of rotation in the horizontal direction with a statistical significance (p < 0.05). During the follow-up, there was no aseptic loosening with the relevant cup migration or significant change in the position of the acetabular cup at the final follow-up (p > 0.05) after the revision. All seven fractures and bone grafts realized a bone union until the latest follow-up. Conclusions: Following excessive reaming, the acetabular component was placed too far medially and resulted in an intrapelvic cup protrusion. An unstable cup following a fracture of the medial wall was evident on the immediate postoperative radiographs. In the case of the medial wall perforation with an intrapelvic cup protrusion after the primary THA, the reconstruction with a Ganz reinforcement ring was a successful treatment option resulting in the fracture healing and a stable cup positioning. Surgeons should be aware of that rare and probably underreported complication and restore the anatomic center of rotation by treating the defect intraoperatively.

Effects of degree of translation or rotation of acetabular fragment of periacetabular osteotomy procedure on pelvic X-ray parameters.

The present study aims to investigate the effect of amount of lateralization and/or anteversion of the point where the iliac cut meets with the posterior column cut of periacetabular osteotomy (PAO), on X-ray parameters such as Center of edge (CE) angle, retroversion index (RVI) and sharp angle. Fourteen patients with symptomatic hip dysplasia (CE° < 20°) were included. Pelvis Computerized tomography (CT) sections were used for 3D printing. PAO was then performed on these models. The point (A), 1 cm lateral to the pelvic brim, is marked where the iliac cut intersects the posterior column cut. In Group I (1.5-0), point A is lateralized parallel to the osteotomy line for 1.5 cm. In Group II (1.5-0.5), it is additionally anteverted for 0.5 cm. In Group III (3-0), point A is lateralized for 3 cm and then additionally anteverted for 1 cm (Group IV: 3-1). Radiographs were taken in each stage. The lateral CE angle, RVI and sharp angle were measured. All had an increase in the CE angle and RVI and a decrease in the sharp angle compared to the control group (P < 0.05). The amount of CE angle (ΔCE) or RVI increase (ΔRV) was as follows: 3-1(38°, 0.3) > 3-0(27°, 0.2) and 1.5-0.5(25°, 0.1) > 1.5-0(17°, 0.07) (P < 0.05) (with no difference between groups 1.5-0.5 and 3-0, P = 0.7). The amount of sharp angle decrease was as follows: 3-1(20°), 3-0(18°) < 1.5-0.5(11°) < 1.5-0(8°) (P < 0.05). The lateralization of the intersection point where the iliac wing cut meets with the posterior column cut along the cut surface led to an increase of lateral cover and focal retroversion. Additional anteversion leads to further increases in those parameters, while groups 1.5-0.5 and 3-0 did not differ between.

Autologous free iliac crest bone grafting of glenoid through the rotator interval using double-barrelled cannula.

PURPOSE: The primary aim of this study is to prove that reconstructing the anterior glenoid defect with iliac crest graft arthroscopically using double-barrelled cannula through the rotator interval is safe and prevents both recurrence of instability and the neurovascular injury because subscapularis muscle is not split and procedure is far away from important structures. METHODS: Thirteen patients with anterior shoulder instability and engaging Hill-Sachs lesion were reviewed after arthroscopic reconstruction of the anterior glenoid with iliac crest autogenous graft. Patient satisfaction and Western Ontario Instability Score (WOSI) were evaluated on clinical examination. Computed tomography was used to analyse graft position on sagittal and axial planes. RESULTS: The mean follow-up was 28.7 months (SD 7.1), and age at surgery was 31 years (21 to 64 years). Post-operatively there was only one dislocation due to trauma. There was statistically significant improvement of WOSI scores (p: 0.001). There was not any neurological injury. Graft position on the axial plane was described as flush in 5 cases (41%), lateral in 2 (16%), too lateral in one (8%) and medial in 4 of the cases (33%). Graft position could be accepted as high in only three patients (23%). CONCLUSION: Arthroscopic reconstruction of glenoid defect using autogenous iliac bone graft, through rotator interval, without splitting subscapularis is safe and effective without any neurological injury, producing substantial graft position and good functional outcomes in patients.

Biceps tenodesis combined with rotator cuff repair increases functional status and elbow strength.

PURPOSE: The aim of the present study was to prospectively evaluate the elbow flexion and supination strengths and the functional outcomes of patients following arthroscopic rotator cuff repair combined with simultaneous biceps tenodesis. METHODS: 19 patients who underwent arthroscopic rotator cuff repair and biceps tenodesis with at least 24 months of follow-up were included. Patients were evaluated using a visual analog scale (VAS) for bicipital groove pain, American Shoulder and Elbow Surgeons (ASES), and constant scores (CS), biceps apex distance (BAD), elbow flexion, and supination strengths. RESULTS: The VAS for biceps groove measurement averages in the postoperative 6th, 12th, and 24th months was lower in comparison to preoperative data and was considered to be statistically significant (p < .05). The constant score, an average of all postoperative measurements and scores, was found to be higher than preoperative values and was considered to be statistically significant (p < .01). There was a significant difference in the operated and non-operated forearm supination and elbow flexion muscle strength measurements at the postoperative 3- and 6-month follow-ups (p < .01). CONCLUSION: Arthroscopic biceps tenodesis into the anchors of the lateral row in combination with rotator cuff repair provides an increase in the strength of elbow flexion and forearm supination, while decreasing pain. LEVEL OF EVIDENCE: Level IV.

Bony landmarks, distances and their correlations to each other, which can be used during periacetabular osteotomy: a CT study performed on dysplastic hips.

As a surgical technique for hip dysplasia, Bernese periacetabular osteotomy (PAO) still poses technical difficulties and unclear surgical steps like the depth of the first 'ischial' cut, the start of the iliac cut and the width of the retroacetabular cut to prevent either iatrogenic joint entrance or posterior column fracture. Twenty-seven dysplastic hips (CE < 25°) were randomly matched with nondysplastic hips (n: 27, CE > 25°). 3D CT sections of the hips were evaluated and the width of the ischium, the distance from the infra-acetabular groove to the ischial spine, from the anterior superior iliac spine (ASIS) to the joint or sciatic notch or the sciatic spine, from the most medial point at the acetabulum to the posterior column, ischial spine or sciatic notch were measured for each group and correlated. The distances (mm) from the infra-acetabular groove to the ischial spine (42 ± 4, 44 ± 4, P: 0.03), the anterior superior iliac spine to the joint (52 ± 6, 60 ± 3, P: 0.03), the most medial point at the acetabulum to the posterior column (34 ± 2, 36 ± 2, P: 0.005) were shorter in the dysplastic group. The distance from the ASIS to the sciatic notch was correlated with the distance from the infra-acetabular groove to the ischial spine, from the ASIS to the joint and the most medial point at the acetabulum to the posterior column. The distance from the ASIS to the sciatic notch can be used intraoperatively to guess the X-ray guided or blindly osteotomized stages to predict the width or depth of the osteotomy to prevent intraarticular extension or posterior column fracture.

Scapular spine base fracture with long outside-in superior or posterior screws with reverse shoulder arthroplasty.

BACKGROUND: The purpose of the present study was to determine how long superior screws alone or in combination with posterior placement of metaglene screws protruding and penetrating into the scapular spine in reverse total shoulder arthroplasty affect the strength of the scapular spine in a fresh cadaveric scapular model. METHODS: Seven fresh cadaver scapulas were allocated to the control group (short posterior and superior screws) and seven scapulars to the study group (spine base fixation with a four long screws, three with both long superior and long posterior screws). RESULTS: The failure load was lower in the spine fixation group (long screw, 869 N vs. short screw, 1,123 N); however, this difference did not reach statistical significance (p>0.05). All outside-in long superior or superior plus posterior screws failed due to scapular spine base fracture; failures in the short screw group were due to acromion fracture. An additional posterior outside-in screw failed to significantly decrease the failure load of the acromion spine. CONCLUSIONS: The present study highlights the significance of preventing a cortical breach or an outside-in configuration when a superior or posterior screw is inserted into the scapular spine base.

A comparison of ice wrap and subacromial injection for postoperative pain and edema control following arthroscopic rotator cuff repair.

BACKGROUND: Postoperative pain and edema are the most common problems associated with arthroscopic rotator cuff repair. The purpose of the present study was to compare ice wrap and subacromial injection (SI) as treatments for early postop pain and edema control and to contrast them with a control group. MATERIALS AND METHODS: 59 patients treated with arthroscopic rotator cuff repair were randomized into three groups: 23 patients who received an ice wrap, 20 patients who received a SI, and a control group of 16 patients. RESULTS: Patient demographics, comorbidities, tear retraction, degree of fatty muscle degeneration, surgical procedures, and amount of irrigation fluid were similar for the three groups, which also showed similar results regarding postoperative pain and edema control as well as analgesic consumption. CONCLUSIONS: The present study failed to show any difference in effectiveness between the two most common pain management modalities, or between those modalities and the control group. LEVEL OF EVIDENCE: IV, prospective observational study.

A CT study of the femoral and sciatic nerve periacetabular moving in different hip positions.

BACKGROUND: Femoral and sciatic nerves could be damaged during various stages of the periacetabular osteotomy. Changing the position of the hip could be the most effective way of preventing nerve injuries. The purpose of the present study was to investigate the distances of the nerves to various bony landmarks with different hip positions in computerized pelvic scanograms of healthy adults. MATERIALS AND METHODS: Fifteen healthy male adults (30 hips) (age 30 ± 6) were included. Scans were performed at three different hip positions measured by goniometer (neutral "N," flexion (30-45°) + abduction (30-45°) + external rotation (20°) "F" and neutral+ abduction (30-45°) + external rotation (20°) (Nabext) at three different levels (sourcil "1," the middle of the femoral head "2," and lower border of triradiate cartilage "3." RESULTS: At the sourcil level, the femoral nerve was found to be the furthest distance from the anterior acetabulum in the neutral position compared to flexion or neutral plus abduction, external rotation (p < 0.001). For the sciatic nerve, at level 2, hip flexion resulted in a greater distance than in the neutral position (p = 0.001). For level 3, hip flexion caused a decrease in the distance of the sciatic nerve to the acetabulum compared to both neutral positions (N or Nabex) (p = 0.001). CONCLUSIONS: During a pubic cut of the osteotomy, the femoral nerve moves closer to the anterior acetabulum wall with hip flexion or abduction plus external rotation. During an ischial cut, the sciatic nerve gets closer to the ischium with hip flexion while it moves away from the bone during retroacetabular cut. Level-III Study.

Bare area on the trochanter and its correlations to gluteal tendon insertion dimensions.

Gluteus medius and minimus tears have recently been reported to be very common and the main etiology of lateral sided hip pain. The purpose of this study was to determine whether there is any correlation between the dimensions of the tendon insertions and bare areas (BA) and various bony landmarks. Twenty-seven hemipelvises from adult male hips were included. The bony landmarks [anterior tip (Ta), posterior tip of trochanter, vastus tubercle (VT) and center of BA] were marked. The longitudinal lengths and widths (maximum) of posterosuperior (PS), lateral facets (LF), minimus insertion (Min) and BA and the distance between posterior (Tp) and Ta and between anterior/posterior tips and the VT or center of BA were measured using a digital caliper. A correlation analysis was performed between variables. There was a correlation between LFlength and Minlength (r = 0.4, P = 0.01) and between Ta-BA and PS + LF (r = 0.5, P = 0.003) or Minlength (r = 0.4, P = 0.016). LFwidth was negatively correlated with BAwidth (r = -0.4, P = 0.002). Tp-BA was negatively correlated with BAwidth (r = -0.4, P = 0.01). LFwidth was correlated with Tp-BA, and this nearly reached statistical significance (r = 0.3, P = 0.05). BA can be used intraoperatively as landmarks to estimate the width of the LF and also to determine the length of the longitudinal insertion of the gluteus medius and minimus tendons.

Labral tears with axial plane disorders.

OBJECTIVES: This study aims to determine if there is an axial plane coverage insufficiency in patients with symptomatic labral tears compared to the contralateral asymptomatic side and healthy control subjects. PATIENTS AND METHODS: This retrospective study was conducted between December 2017 and January 2019. Thirty patients (21 males, 9 females; mean age 28 years; range, 20 to 36 years) operated due to unilateral symptomatic acetabular labral tears secondary to femoroacetabular impingement were evaluated. Twenty asymptomatic patients (13 males, 7 females; mean age 27±9 years; range, 19 to 36 years) were included in the control group. The relationship between acetabular morphology and labral tear was investigated with the comparison of unilateral symptomatic hips with contralateral asymptomatic hips and the control group by using radiological parameters on plain radiographs and computed tomography. RESULTS: When the patient group symptomatic side was compared to the control group, acetabular anteversion angle (A A A) and alpha (α) angle were higher, while posterior acetabular sector angle and horizontal acetabular sector angle were lower. When the asymptomatic side was compared to the control group, AAA was higher in the patient group. There was no difference between the symptomatic and asymptomatic sides in the patient group; the symptomatic side yielded a higher α; angle. CONCLUSION: Posterior axial plane coverage deficiency in combination with cam deformity (increased α angle) seems to play a role in the pathogenesis of symptomatic acetabular labral tears, even creating a side-to-side difference in some individuals.